"PWR" Series

When you live for bigger venues, you demand a move up to the workhorse. The PWR Series consists of a single 12" or 15", and for high impact applications, the PWR215 is the monster with dual 15" subwoofers and a horn. These PWR speakers are only for the most serious applications.

PWR For Serious Power...
The PWR Series Loudspeaker systems feature woofers with die cast frames, for greater stability and the ability to handle high Sound Pressure Levels. A two-layer, 3" voice coil prolongs the speaker's life. An extended pole piece and flat spider means lower distortion and more accurate sound. The massive 210 ounce motor structure will ensure the PWR Series performance will always exceed your expectations.

The high frequency driver on the PWR Series' full-range enclosures features a titanium diaphragm with a 2" voice coil and Power Sentry protection circuit in the crossover network further insures against high frequency driver failure. The 1" throat, high frequency horn produces exceptionally clean vocals, with a wide dispersion 90º by 40º coverage pattern.
Inputs are dual 1/4", dual banana plug, or stripped wire leads.

PWR Series PWR112 PWR115 PWR215
Diameter of Subwoofer (1) 12" (1) 15" (2) 15"
Type Full Range Full Range Full Range
Frequency Range (-10dB) 39Hz-18kHz 30Hz-18kHz 32Hz-18kHz
Nominal Impedance 8 ohm 8 ohm 4 ohm
Sensitivity 95dB 96dB 97dB
Power Handling (watts) 200 RMS/800 Total 250 RMS/1000 Total 500 RMS/2000 Total
Crossover Frequency 1.8kHz 1.8kHz 1.8kHz
Maximum Peak SPL 124dB 126dB 130dB
Weight 58 lbs (20.6kg) 78 lbs (27.6kg) 120 lbs (39.6kg)
Dimensions 25 1/2"H x 17 5/8"W x 13 7/8"D
(64.8cm x 44.8cm x 35.2cm)
28 3/4"H x 22 3/4"W x 17 5/8"D
(73cm x 57.8cm x 44.8cm)
47 3/4"H x 22 3/4"W x 17 5/8"D
(121.3cm x 57.8cm x 44.8cm)