Home
   
  Thunder4200x Amplifier

Thunder4200x Amplifier The front and rear crossovers are 18dB/octave, continuously variable between 50Hz and 200Hz high pass or low pass, giving you several options in setting up your system.

The new symmetrical power supply allows for better thermal distribution.
The "sum output" jacks on the four-channel amplifiers provide a line level summed output of the right front/right rear and left front/left rear input signals. This output is typically used to drive an external subwoofer amplifier.

RMS Power measured at 12.5 Volts DC:
25 Watts x 4 into a 4 Ohm load with less than 0.1% Thd+N
50 Watts x 4 into a 2 Ohm load with less than 0.3% Thd+N
100 Watts bridged x 2 into a 4 Ohm load with less than 0.3% Thd+N

Dynamic Power (IHF-202 Std) measured at 14.4 Volts DC
55 Watts x 4 into a 4 Ohm load
100 Watts x 4 into a 2 Ohm load
200 Watts bridged x 2 into a 4 Ohm load

Signal to Noise Ratio:
> or = 110dB A-Weighted

Damping Factor:
>200

Frequency Response:
20Hz-20kHz±0.25dB

Thunder EQ:
Variable Bass Boost (0-18dB) centered at 40Hz

Crossover:
Variable 50Hz to 200Hz, 18dB/Octave, High Pass or Low Pass Configurable

Dimensions:
11" x 9" x 2" (27.9cm x 22.8cm x 5cm)
12-1/4" x 9" x 2" (31.1cm x 22.8cm x 5cm) Including IsoFeet(TM)

Also Available: Thunder4200XW with high gloss white finish




MTX HOME · NEWS · SUPPORT · WHERE TO BUY · ISO 9001 CERTIFIED · CONTACT